Danger Den 3x120mm Fan Radiator Need Some advice/Help

[shata]

Hi!
Well im in a mod right now to add custom liquid cooling to my black Thermaltake Armor Case. Here is a picture.
http://www.t-mobilepictures.com/photos/photo05/e3/3d/96950fc3b73f.jpg?_rh=2tmebu35wb3qb6euqsum1yhrf

Well to cut to the main thing i posted this thread for is i need a drawing with the measurements of this radiator like a 1:1 drawing in Metric so i can plan out the top of the case. Now i was wondering if anyone was nice enough to find/Make one for me so i dont have to buy one right away.
Here is the model.
Danger Den Black Ice Pro III Radiator

Any help would be super!
Thanks
mike

 

[waylander]

Here are the dimensions...

"Optimal 397 x 133 x 40 mm (15.63 x 5.25 x 1.77 inch) dimensions allows it to fit inside most mid-tower cases."

Take a piece of paper, draw a rectangle that is 397mm (15.6") x 133mm (5.24"), cut it out and place it where ever you want.

 

[shata]

Oh alright thanks for that
Just one question the main reason i need a template is the 120mm Fan holes with the Fan Screw holes. I cant just BS my way through that lol. What i have planned is cutting three 120mm holes in the top of the armor and then mounting the Radiator on the inside of the case like this...

Case _________
Fans *********
Radiator -------------

So it sucks the Cold air into the case and cools the radiator.
So yeah im having trouble finding any documentation on the Fan layout and Screw holes.

 

[waylander]

the easiest thing to do might be to just go down to a store that carries it and ask them whether you can trace it onto a piece of paper, including the location of the screw holes (no jokes pls) on the rad.

 

[shata]

Alright thanks a bunch for helping/Advice.
mike

 

[pengwin]

or just wait til u get it and then cut.