First build ($2300)

CPU:Intel I7 3930k
Mobo:ASUS P9X79 Deluxe
GPU:Nvidia GTX 680 4GB (SC)
Ram:Corsair XMS3 16GB (4 x 4GB) DDR3 2000mhz
CPU Cooling:Corsair H100 Extreme Liquidcooling
PSU:750W (Don't remember brand)
HD:120GB SSD (Using 1TB on laptop over network for storage)
Extra:ASUS 12X BD-ROM 16X DVD-ROM 48X CD-ROM Internal

Please ignore my horrible wire management, I'm still learning. (I zip tied the wire touching the graphics card after I noticed it in this picture)

While showing this I also had a question, while installing the ram in this mobo the directions said to use DIMM A1, B1, C1, and D1, but the only way I could get the bios to recognize it was to put them in A1, A2, C1, and C2, any idea?

Probably going to get another SSD to throw in here too.
3 answers Last reply
More about first build 2300
  1. Did you update the BIOS to the latest release yet? Make sure you're running with the latest version to ensure this isn't the reason for your RAM issue. Otherwise, you'll continue running dual-channel rather than quad-channel.

    If you update the BIOS and find you're still having the issue with the board recognizing all the RAM you have in the appropriate spots (A1, B1, C1, D1), then I'd start the RMA process for the motherboard.
  2. Dude I would love to get my hands on that machine to tidy those cables up lol.

    Ubercake is right, do a BIOS update and then see if you're good.

    Usually the manual recommends to use the "blue" or colour slots first, have you tried that?
  3. Also is there a "Memory Recheck" setting in the BIOS? Can fix unread DIMMS sometimes.
Ask a new question

Read More

Homebuilt Systems