NEED BUILD REVIEW

I am building a new PC, (at the moment i have a 1st gen i7@ 1.6ghz with a nvidia 320) i would like advice, and I need to know if i need to buy any or SATA cables etc.

I would like to connect the 3 Case fans (but am not sure if there enough ports) into the motherboard so they are controllable from system software.

Please review this build listed below.

http://secure.newegg.com/WishList/PublicWishDetail.aspx?WishListNumber=15318194

Thanks in advance!
5 answers Last reply
More about need build review
  1. Drop the 140mm fan. The case has plenty of cooling.
  2. most times you have to use a y fan cable. they make them for both three pin fan headers and 4 pins. the mb on new egg said there were only three i would download the owners guild for the mb your looking at and see if it matches up.
  3. abhop26 said:
    I am building a new PC, (at the moment i have a 1st gen i7@ 1.6ghz with a nvidia 320) i would like advice, and I need to know if i need to buy any or SATA cables etc.

    I would like to connect the 3 Case fans (but am not sure if there enough ports) into the motherboard so they are controllable from system software.

    Please review this build listed below.

    http://secure.newegg.com/WishList/PublicWishDetail.aspx?WishListNumber=15318194

    Thanks in advance!

    The board comes with two SATA cables (it's in the newegg pic) so your good to go.

    http://www.asrock.com/mb/overview.asp?Model=970%20Extreme3&cat=Specifications <----- there's a list of all your headers and connections. Your going to be fine.
  4. azeem40 said:
    Drop the 140mm fan. The case has plenty of cooling.


    im guessing investing in a hyper 212 would be a better option?
  5. Yes.
Ask a new question

Read More

Build Systems