Archived from groups: rec.photo.digital (More info?)
Hi all!
Today i wanted to use my finepix S2 for a shoot. I switched the camera
on and the first image i took was deep purple all over. The camera
works OK - controls, AF - except for the picture quality. All images i
take are purple, without any detail. If i use the flash, i can see some
detail. I've cleaned the CCD but the problem still exists. Is there
something - serious - wrong with the sensor (CCD)? Thanks for your
replies! Kind regards, Peter
Archived from groups: rec.photo.digital (More info?)
"beeldbouwer" <beeldbouwer@gmail.com> wrote in message
news:1121633294.887721.229980@f14g2000cwb.googlegroups.com...
> Hi all!
> Today i wanted to use my finepix S2 for a shoot. I switched the camera
> on and the first image i took was deep purple all over. The camera
> works OK - controls, AF - except for the picture quality. All images i
> take are purple, without any detail. If i use the flash, i can see some
> detail. I've cleaned the CCD but the problem still exists. Is there
> something - serious - wrong with the sensor (CCD)? Thanks for your
> replies! Kind regards, Peter
>
Sounds like it may need a trip to the repair shop but before this, try
removing the batteries for several minutes to reset it. If it has a second
"coin" type battery to retain the data and settings, remove that too.
John
Archived from groups: rec.photo.digital (More info?)
Call Fuji tech support. They have had problems with the CCD on the S2
Pro, and will replace it free of charge, even if it's out of warranty.
I had mine replaced.
Address for Fuji is:
Fuji Photo Film, U.S.A., INC.
Service Department
1100 King George Post Road
Edison, NJ 08837
1-800-659-3854 Ext 34
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.