Sign in with
Sign up | Sign in
Your question

Can this be dun

Tags:
  • Power Supplies
  • Fan
  • LED Monitor
  • Motherboards
  • Components
Last response: in Components
Share
September 28, 2012 9:20:21 PM

Ok folks I have a spear 4 pin fan conecter on my mother board all my fans are conected to the other ones and theres one free pin so 3 pin fan conections.

Can I us the free fan conection on the mother board to make a 3 pin fan conection to a 4 pin molex conection BUT I onley need the black and yellow conection to run LED strips ........will that run 2 LED strips each LED strip has 30 LEDs in it

Thanks

More about : dun

a b ) Power supply
a b V Motherboard
September 28, 2012 9:58:27 PM

I am no expert on this stuff, but why try to plug it into the motherboard? Can't you just get a LED strip that goes directly to MOLEX and then just connect it to a MOLEX wire and not have to use the fan slot?
September 28, 2012 10:00:46 PM

Dont have a free molex plug but do have 2 x 4 pin ATX (in one braided cable) So presume I could use those presume its ATX ...two times 4 pin plugs each plug has two yello and two black cables to it
a b ) Power supply
a b V Motherboard
September 29, 2012 5:16:05 AM

As long as the colors are right it will probably work.
!