Sign in with
Sign up | Sign in
Your question
Solved

How to let CPU automatically change Ghz speed?

Last response: in CPUs
Share
October 6, 2012 2:18:46 AM

I overclocked my Phenom 965 to 4.0ghz by changing the multiplier and vcore to 1.42. Everything works fine, temps are fine, but in CPU-Z it shows that the CPU is always running at 4 ghz. Where do I go to make it automatically change the speed whenever needed instead of staying at 4ghz all the time? Like where do i go in BIOS or wherever to make it to where for example, Im just browsing or idle then the CPU will run at lower ghz but under loads itll run at around 4ghz?

Thanks!

Best solution

a c 133 à CPUs
October 6, 2012 2:22:46 AM

Enable Cool,N,Quiet in the bios and set your windows power settings to balanced.

On some boards(but not all), Manual voltages cause you to loose power savings. If you can use a voltage offset in the bios, it may be a better option.

Hope this helps.
Share
October 6, 2012 2:32:14 AM

nukemaster said:
Enable Cool,N,Quiet in the bios and set your windows power settings to balanced.

On some boards(but not all), Manual voltages cause you to loose power savings. If you can use a voltage offset in the bios, it may be a better option.

Hope this helps.



Thanks this was what I was looking for!
m
0
l
Related resources
October 6, 2012 2:32:22 AM

Best answer selected by bingaloman.
m
0
l
a c 133 à CPUs
October 6, 2012 4:07:33 AM

Glad to help :) 
m
0
l
!