Some Qs about IDE master/slave config.
Last response: in Components
Hi i have some questions about the IDE cables configurations.
1. The master/slave position changes from the 40 wires to the 80 wires cable?
2. Do i have to set the devices in the M/S position even if i dont have them in Cable Select configuration?
3. Do all the types of cables support CS?
Thanks for the help.
1. The master/slave position changes from the 40 wires to the 80 wires cable?
2. Do i have to set the devices in the M/S position even if i dont have them in Cable Select configuration?
3. Do all the types of cables support CS?
Thanks for the help.
More about : ide master slave config
Related ressources:
- ForumMaster/Slave positions on IDE cable
- ForumHomebuilding Qs /C2D Config Setup.
- ForumIDE /Promise100 config newby question
- ForumHow to config MASTER-SLAVE HDD's
- ForumAHCI/ IDE and Master/Slave
- ForumOptical IDE Master-Slave reversed - Jumpers correct!
- ForumDrive Performance / OS Installation Qs
- ForumSATA Master/Slave with IDE Emulation
- ForumPlease help me on SATA - IDE connectivity ( master-slave )
- ForumSATA as Primary IDE question ( IDE master/slave vs SATA channels)
- ForumWhich should come 1st, the chicken or the egg ( Master/Slav ..
- ForumMaster/Slave vs Cable Select
- Forumhard drive ide master/slave question
- ForumDVD burners be on their own channel or is Master/Slave OK?
- Foruma7n8x Deluxe - Optical Drives Master/Slave Problem
- Forumprimarry vs secondry : master/slave
- ForumAsus P5Q Pro IDE Boot Problems! help?
- ForumP5Q Deluxe won't boot on sata hdd if I plug my 2 IDE HDD
- ForumWill this PSU be enough?
- ForumHelp about CPU connecting to monitor.
- More resources
Read discussions in other Components categories
!
