New system buid, no video output!!!! I NEED HELP

Hi, just finished building my computer, this is not my first, I know how to manipulate all the components and I'm pretty sure I did not forget a cable, or break something. All components are working fine the GPU, HSF, motherboard, power supply, fans, led, front panel. Thought I did not check the PSU because i do not own a digital multimeter and i can't really borrow one. I also made couples of the steps in this help guide :

My build is :

Antec Three Hundred ATX
ASUS P8Z68-V PRO/GEN3 LGA 1155 Intel Z68
CORSAIR CX600 (600W)
Intel Core i7-2600K 3.4GHz (LGA 1155 95W) with Intel HD Graphics 3000
G.SKILL Ripjaws Z Series 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600
Seagate Momentus XT 750GB

I really need help ! Maybe its a problem with my components choice? Maybe a did break a piece? I have some doubt with my Power supply, maybe it down not have enough voltage, or maybe my RAM is not compatible because on the box it says "made for LGA 2011. I just don't know ...

3 answers Last reply
More about system buid video output help
  1. Try to plug into the integrated graphics on your motherboard without the 670 and see if you get any video.
  2. Still nothing... would my integrated graphics could run the bios? Does that mean the my GPU is not the problem?
  3. Maybe the motherboard is faulty since the integrated graphics should be enough to run the computer.
Ask a new question

Read More

New Build Systems