HELP CANT BOOT AFTER NEW MOBO Tags: Homebuilt Boot Systems Last response: June 24, 2012 10:29 PM in Systems Share ubergeek122 June 23, 2012 10:32:46 PM I really need help. I just bought this: http://www.tigerdirect.com/applications/SearchTools/ite... and this: http://www.newegg.com/Product/Product.aspx?Item=N82E168... Now, whenever I go to boot up, I get to "Starting windows". I get 3 out of the 4 colored, and right before the 4th one appears, my computer restarts. HELP ME! Im not in RAID config, I have windows 7 home premium x64, and I'm pretty sure my HDD works. More about : boot mobo | E-mail me updates | Report abuse Register or log in to remove SR-71 Blackbird Homebuilt system Expert June 23, 2012 10:37:47 PM This topic has been moved from the section Windows 7 to section Systems by Area51reopened | Report abuse ubergeek122 June 23, 2012 11:36:54 PM I seriously don't want to reinstall, microsoft was no help, because I dont have my disk or product key anymore, and GigaByte is closed. | Report abuse lourendo June 23, 2012 11:57:40 PM try reseating your ram or using the minimum and swapping them out. this might be a faulty ram issue that only manifests itself when windows uses enough to activate the faulty modules. also try opening bios and checking what ram is listed. some bios needs to be simply opened and saved to recognize hardware. | Report abuse Related ressources Can't boot after installing new RAM - Forum Can't boot . Mobo standby lights up. No fans. No beeps. - Forum PC won't boot after installing new mobo , CPU, PSU, and RAM - Forum Cant boot from any divice after installed new HDD - Forum Can't enter BIOS after flash, does POST but doesn't boot - Forum Ask the community Publish lourendo June 24, 2012 1:50:05 AM Check your bios version. version "F3" is the first to enable the am3+ socket. if it is lower than that you might have to update the bios with an am3 socket to enable am3+ | Report abuse ubergeek122 June 24, 2012 5:18:16 AM Figured it out. Its a retarded anti-piracy measure, and I got it fixed. | Report abuse lourendo June 24, 2012 10:29:14 PM ubergeek122 said:Figured it out. Its a retarded anti-piracy measure, and I got it fixed. how did you do it? | Report abuse Register or log in to remove Ask the community Publish Tom's Hardware>Forum>Systems>HELP CANT BOOT AFTER NEW MOBO> Related ressources: ForumCan't boot after upgrading CPU ForumHelp me!!! my computer can't boot after upgrade a graphic card ForumWindows 7 won't boot after new motherboard but can get to BIOS? ForumUpgraded CPU, Mobo , and RAM but cant boot ForumPc won't boot after installing new graphics card ForumPC Won't boot after installing new Graphics card ForumGigabyte Ga-Z77X-UP4-TH Infinite Boot Loop. Can't access BIOS! HELP ! ForumWindows 7 won\'t boot after BIOS Update! HELP ! ForumSystem hangs after POST (ASUS P5B). Can't boot w/disk or flash BIOS. ForumI built a new computer using a dx79sr mobo processor is a i7-3930k now i cant lo ForumWindows 7 wont boot after installation of new RAM ForumNew Build Won't Boot After Multiple RMAs ForumFeedback on new build. Forum[New PC/Rebuild] for streaming league of legends ForumNew Build Won't Boot More resources Read discussions in other Systems categories Homebuilt New Build Prebuilt Cases Power Supplies RAM CyberPower !