Sign in with
Sign up | Sign in
Your question

Fans spin and everything working but i have a blank screen on newbuild

Last response: in Systems
Share
June 28, 2012 1:21:18 PM

I'm currently connected to my TV through HDMI and I'm just getting a blank screen, how can i fix it? Is it because maybe the mobo is automatically trying to connect through VGA?

No error bleeps when startup, please please help i'm so lost and google isn't my friend anymore :( 

wait a minute, when i hold Delete to try to open the bios, the motherboard speaker beeps..
June 28, 2012 1:29:10 PM

check all your power wires, make sure you have the extra 4 or 8 pin power wire plugged into the board. Make sure you have a PCI-e power wire plugged into your video card, if you have one.

Try the VGA cable, HDMI can be a pain sometimes.
June 28, 2012 1:31:47 PM

bucknutty said:
check all your power wires, make sure you have the extra 4 or 8 pin power wire plugged into the board. Make sure you have a PCI-e power wire plugged into your video card, if you have one.

Try the VGA cable, HDMI can be a pain sometimes.


I dont have a VGA cable :ouch: 
Related resources
June 28, 2012 1:33:35 PM

does your board have a system speaker, or does your case have one? Some boards dont have speakers, and many new cases dont either, so sometimes, your stuck with a computer than cant make error beeps.
June 28, 2012 1:36:37 PM

bucknutty said:
does your board have a system speaker, or does your case have one? Some boards dont have speakers, and many new cases dont either, so sometimes, your stuck with a computer than cant make error beeps.


Yh it does, i didn't have a beep on start up, then when i press delete it still doesn't bleep, but when i hold delete it starts bleeping, if i make sense :lol:  im so peed of right now
June 28, 2012 1:54:38 PM

H.E.L.P am going to get the old monitor down later and see if it'll work
!