Sign in with
Sign up | Sign in
Your question

DNS/DHCP with Windows Server 2008 with a DHCP Router

Last response: in Networking
Share
Anonymous
July 5, 2011 7:14:10 PM

Hi,

I'm currently trying to configure up a test environment using Windows Server 2008 R2.

I'm needing to do the following with it but have looked everywhere for answers which are non existent!


I have a DHCP Router which is connected to the Modem, the Router has the IP Address of 192.168.1.50 and is assigning addresses of 192.168.1.100 - 192.168.1.150

I'm wanting to still allow the DHCP Router to hand out addresses to clients connected directly to it without logging into a domain, but for my Windows Server 2008 R2 Domain Controller to hand out DHCP addresses of 192.168.0.50 - 192.168.0.100 and have a static IP of 192.168.0.1. I want my DHCP server to act as DNS/DHCP and have AD DC.

How would I be able to set this up so that my 'second' 192.168.0.1+ range network gets an internet connection from the 192.168.1.50 DHCP Router but can assign out IPs to Computers connected to the Server network?

The Server i'm using for the Domain Controller is a HP ProLiant ML110 which has both a NIC and a Management NIC.

Sorry i'm a newbie and this may all be impossible, but I really appreciate any help!

Thanks
!