Adding a slim fan to the Hyper 212 EVO?

reprotected

Distinguished
Oct 13, 2009
622
0
19,010
After torturing my CPU at 90 degrees for a week and replacing the old fan with a new Hyper 212 EVO, I'm thinking of adding a new fan next to it, specifically the Scythe Slip Stream Slim (http://www.canadacomputers.com/product_info.php?cPath=8_130&item_id=039680). My question is will it work? Also, if you have other opinions on other fans that could be much better, feel free to do so.
 
Aug 13, 2012
1,349
0
11,460
you might have some trouble mounting because the way the fans mount onto the heat sink is through a fan bracket. You attach the fan to a bracket and screw it in then attach it onto the heat sink and since they are SLIM and not fill size it might not work.
 

rayner428

Honorable
Dec 3, 2012
75
0
10,640


It Will Work As Long As You Can Power It And Mount It

It Can Be Mounted Because Its Diameter Is Compatible

You Can Connect Its 4/3-pin Chassis Fan Connector To The Motherboard Or The PSU With Some Spliters
 

rayner428

Honorable
Dec 3, 2012
75
0
10,640
Corsair SP120 High Performance Fans Will Do The Trick I Had My System Burning At 90 Degrees Max 95 Degrees But When I Replaced The Fans With These Fans It Became 70-80
Degrees I Don't Mind Helping Anyone :)
 

rayner428

Honorable
Dec 3, 2012
75
0
10,640
SP120 Have Different Colors Look Stunning Have Good Airflow And A Quiet Edition For Shushing Down The System But Still Using Noise Dampening Material Will Make This A Silent Enough Fan ;)