H hellomoto_24 Honorable Nov 12, 2012 2 0 10,510 Nov 12, 2012 #1 I just built my new computer (intel based) and i powered it up to bios and it's shows my 3.3 voltage meter in the red it's at 2.944 v could this mean my psu (Tx) 850 is in need of an upgrade or is there some default setting that i need to change.
I just built my new computer (intel based) and i powered it up to bios and it's shows my 3.3 voltage meter in the red it's at 2.944 v could this mean my psu (Tx) 850 is in need of an upgrade or is there some default setting that i need to change.
B bumnut53 Distinguished Sep 19, 2011 870 0 19,160 Nov 12, 2012 #2 You don't usually have to change any voltages unless you are overclocking, I leave them all set at auto. Does the machine work? Upvote 0 Downvote
You don't usually have to change any voltages unless you are overclocking, I leave them all set at auto. Does the machine work?
H hellomoto_24 Honorable Nov 12, 2012 2 0 10,510 Nov 12, 2012 #3 yes it works powers right up all that good stuff just that one volt meter is showing red Upvote 0 Downvote
Rockdpm Splendid Dec 26, 2011 4,439 0 23,160 Nov 12, 2012 #4 Until the computer actually starts screen flashing or flying around the room... You should be ok until then Upvote 0 Downvote
Until the computer actually starts screen flashing or flying around the room... You should be ok until then