Post beep, but no video

[Santhone]

I decided to build my own pc, and got some very good advice on this forum, so it seemed appropriate i should return here for some troubleshooting.
I installed all my components, and have the single post beep from the Mobo (this is good news, right?), but have no signal to my monitor.
Neither from the VideoCard or the built-in Mobo Video.
What steps do i go trough to troubleshoot?
Specs:
I7 3770k
Gigabyte GA-Z77X-D3H
OCZ Fatal1ty 750WPSU
Corsair Vengeance LP Series Arctic White DDR3-1600, CL9 - 8GB Kit
Gigabyte GeForce GTX 670 OC, Windforce 3X

 

[pasanwc]

Try changing the RAM positions and try to boot with only one RAM at first. And make sure all the peripherals are in place twice before booting up. If not successful try turning it on just with motherboard, RAM, CPU and graphic card... you can always set the other stuff later on

 

[Santhone]

Never Mind, the solution was simple, i had to source my monitor to dvi manually on another pc, and it worked like a charm.
Rookie mistake,
This one can be closed