Sign in with
Sign up | Sign in
Your question

Coolermaster HAF 932 fans.

Last response: in Components
Share
November 26, 2012 10:23:37 PM

I'm wondering if there is any way to test to make sure the fans on the inside work before building the computer? I don't have a computer right now that will power one up and it seems that the fan has a peripheral male and female connection, what do I do?
November 26, 2012 10:26:07 PM

I have a 932 my fans work great. Do you have the power supply? You can plug the molex pins into the molex power supply cables and they should turn on. The fans also have on/off switches so make sure you toggle that if they dont turn on at first.
m
0
l
November 26, 2012 10:41:04 PM

I tried turning them on with just the power supply but it might be because it is an active module one. Also since the fans all have molex pins bot male and female would I be able to hook them all together to one molex connector to the power supply?
m
0
l
Related resources
November 26, 2012 10:45:21 PM

Depends on your power supply. My power supplies' molex cables have 2 molex adapters on each cable so I've got 2 fans to each cable (for the fans that I dont have on the motherboard.)
m
0
l
November 26, 2012 10:57:13 PM

The fans themselves have a 3 or 4 pin to molex connector, meaning it looks like I can take the outlet of one fan and connect it to the inlet of another, and taking that ones outlet and connecting it to another fans connector so I would have like 4 fans connected to one molex psu connector.
m
0
l
November 26, 2012 11:20:04 PM

Yeah I guess you could do that. I'm not positive though, I just connected each fan directly to a power source.
m
0
l
!