Liquid cooling Parts

[taxemicshadow]

Are these parts good and all compatible? I will add a screenshot aswell. All parts are found on Frozen CPU

Swiftech MCP35X 12v PWM Controlled Water Pump - White

Select G 1/4" Fittings (Qty. 2): 3/8 x 1/2 TFC Compression Fitting ($7.98)
$107.97 $107.97

Bitspower 5.25 Bay Reservoir - Acrylic - UV Blue Seals (BP-WT525AC-CLUVBL)

Select G 1/4" Fittings (Qty. 2): 3/8 x 1/2 TFC Compression Fitting ($7.98)
$62.97 $62.97

PrimoChill ICE Non-Conductive Liquid Cooling Fluid (32 oz.) - Invisible Blue $19.99 $19.99

Bitspower Summit EF CPU Liquid Cooling Block - Intel LGA Series - Ice Blue Acrylic (BP-WBCPUIAC-CUMBKIBL)

Select G 1/4" Fittings (Qty. 2): 3/8 x 1/2 TFC Compression Fitting ($7.98)
$87.97 $87.97

2.5 Meter (8 feet) Feser Tube Active UV Hose - Retail Packed - 3/8" ID (1/2"OD) Anti-Kink Tubing - UV Light Blue $14.95 $14.95

Swiftech MCRx40 "Quiet Power" Dual 140mm Radiator - Black (MCR240-QP)

Select G 1/4" Fittings (Qty. 2): 3/8 x 1/2 TFC Compression Fitting ($7.98)
$72.93 $72.93

NZXT FZ 140mm x 25mm LED Airflow Fan Series - Blue LED

 

[TheBigTroll]

its kind of a waste to use all this for only 2 rads. if i were to do custom, id get at least 4 rads to take advantage of water cooling.

if you are still going for watercooling, id suggest some silverstone air penetrators or noctua nf p14s

 

[taxemicshadow]

its kind of a waste to use all this for only 2 rads. if i were to do custom, id get at least 4 rads to take advantage of water cooling.

if you are still going for watercooling, id suggest some silverstone air penetrators or noctua nf p14s

The reason i chose only a double rad is because it fits perfectly in the top of the 410, Meaning i wouldn't have to ghetto stick it on the bottom of the case or something.

 

[TheBigTroll]

i rather just buy a h100 then. so much cheaper and does the same job. or you could get the nh-d14 like what i did and save even more cash. stock fans that come with corsair are crap so you then have to get some corsair sp120 quiet fans to slap on. their aftermarket fans are actually good

 

[taxemicshadow]

i rather just buy a h100 then. so much cheaper and does the same job. or you could get the nh-d14 like what i did and save even more cash. stock fans that come with corsair are crap so you then have to get some corsair sp120 quiet fans to slap on. their aftermarket fans are actually good

But it looks so COOOOOOOOOOOOLLLL! Plus ill have extra tubing so i could later extend the loop to my gpu/gpu's or my ram, maybe even my psu.

 

[TheBigTroll]

no. the phantom 410 doesnt have enough room to add more rads unless you ghetto mount it. even if so, you cant really cool more than one CPU and one GPU as a 4x 140mm rads just dont have enough radiator space to do so safely

go get yourself a h100 or a noctua nh-d14 or you can get yourself a good watercooling case like a 800D or tj11b from silverstone. then think about watercooling. otherwise its a waste

watercooling ram is so useless. ram doesnt even produce a lot of heat. even if so, its hard to find memory that is compatable

 

[taxemicshadow]

no. the phantom 410 doesnt have enough room to add more rads unless you ghetto mount it. even if so, you cant really cool more than one CPU and one GPU as a 4x 140mm rads just dont have enough radiator space to do so safely

go get yourself a h100 or a noctua nh-d14 or you can get yourself a good watercooling case like a 800D or tj11b from silverstone. then think about watercooling. otherwise its a waste

watercooling ram is so useless. ram doesnt even produce a lot of heat. even if so, its hard to find memory that is compatable

So the h100 with fans and all with fit in the top of the 410, right?

 

[TheBigTroll]

yes

 

[taxemicshadow]

yes

Ok i will stick with that for now. I will wait a little for the whole decked out loop, but it will happen. eventually.

 

[TheBigTroll]

when you get a bigger case bro

 

[bigcyco1]

Lol... no the H-100 is not on par with a custom loop it also sounds like a swamp cooler with stock fans it comes with i am really shocked at what i am reading in this thread really horrible advice imo hope i caught this in time before you bought something overpriced loud and failure prone list your current specs and what you intend to watercool is it just your cpu or cpu and gpus also read the wc sticky thread it will help allot