My new build isn't working none of the fans spin and the motherboard LED doesn't turn on, Although the PSU fan spins when i do the paperclip test. When I first press the power button it flashes a post of 6. Which according to my motherboards manual means this: Do R/W test to CH-2 count reg. Initialize CH-0 as system timer. Install the POSTINT1Ch handler. Enable IRQ-0 in PIC for system timer interrupt. Traps INT1Ch vector to "POSTINT1ChHandlerBlock." I have done these (http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems) steps. My system specs are as followed:
Biostar tz77b Motherboard
Intel i5 3570 (not k)
Sapphire Radeon HD 6870
Antec VP-450
Corsiar Value Series 8GB DDR3 1333
Roswill Ranger Case
P.S. My PSU switch is on and I've tried with and without the GPU in.
Biostar tz77b Motherboard
Intel i5 3570 (not k)
Sapphire Radeon HD 6870
Antec VP-450
Corsiar Value Series 8GB DDR3 1333
Roswill Ranger Case
P.S. My PSU switch is on and I've tried with and without the GPU in.