Help Tags: New Build Systems Last response: July 21, 2012 11:42 AM in Systems Share chewie450 July 20, 2012 4:33:45 PM Hello, i have just got a new asrock 960gm-gs3 fx mobo and amd sempron cpu i have put it together but when i start pc the heat sink fan spins but thats it no hard drives start and nothing on the monitor, what could it be? More about : question g-unit1111 July 20, 2012 4:39:52 PM What heat sink are you using and how do you have it installed? chewie450 July 20, 2012 4:48:45 PM i am using the heat sink that come with the pcu and it is installed the way it says in the book Related resources fx6300 vs fx8320? budget build £700 HELP - Forum DIY NAS Help - Forum Help with my build - Forum I found a MCP61SM-AM motherboard. Help. - Forum need help on my R9 270x hawk - Forum Can't find your answer ? Ask ! Get the answer g-unit1111 July 20, 2012 4:53:17 PM chewie450 said:i am using the heat sink that come with the pcu and it is installed the way it says in the book I was thinking the CPU fan might be shorting out the motherboard but that doesn't appear to be the case. Does your motherboard have onboard video? chewie450 July 20, 2012 4:57:36 PM yes i have my monitor pluged in to it but i trid my igabyte grahics card as well. i cant even hear my hard drive start up chewie450 July 20, 2012 5:08:43 PM could it be i hav not used enough thermol paste? g-unit1111 July 20, 2012 10:16:23 PM chewie450 said:could it be i hav not used enough thermol paste? I can't imagine that would be the problem. Do you have all your motherboard pins set correctly including 24-pin power, 8-pin voltage, and case headers? chewie450 July 21, 2012 11:42:53 AM it is set up the way it saysin the instructions book Can't find your answer ? Ask ! Publish Related resources SolvedHELP! WHats going on here. GeForce GTX TITAN Forum SolvedHelp with new build Forum SolvedI need help. Forum SolvedIs this a good Prebuilt pc? Help Forum SolvedBuild Help, change in original plans Forum SolvedI need help for my rig.. need help!! Forum SolvedHelp Overclocking 6800k Past 4.8Ghz, Thoughts? Forum SolvedHelp on upgrading my HP Prebuilt Desktop Forum SolvedNew PC build with problems and need help. Forum SolvedNeed help in assembling a gaming PC Forum SolvedHelp with Motherboard!!! Forum Solvedamd build help Forum SolvedNeed some help picking parts!!! Forum SolvedPSU Help Required Forum SolvedFriend needs help on either EVGA GTX 780 6GB or EVGA GTX 780 Ti 3GB Forum More resources Read discussions in other Systems categories Homebuilt New Build Prebuilt Cases Power Supplies RAM CyberPower !