Sign in with
Sign up | Sign in
Your question

Asrock N68C-GS FX problem

Last response: in Components
Share
December 2, 2012 12:15:07 AM

I have a problem with my Motherboards' usb ports. Every time I plug in a USB , the USB is not recognized, also it does not give me a notice like"USB is not reconized"

More about : asrock n68c problem

December 2, 2012 1:10:03 AM

Here is a link to the drivers for that mobo;

http://www.asrock.com/MB/download.asp?Model=N68C-GS%20F...

If the USB driver isn't there I'm really not sure what to do. Go into your device manager and see if there are any yellow triangles with ! in them and let us know what section that those are under.
m
0
l
December 2, 2012 1:31:29 AM

bobusboy said:
Here is a link to the drivers for that mobo;

http://www.asrock.com/MB/download.asp?Model=N68C-GS%20F...

If the USB driver isn't there I'm really not sure what to do. Go into your device manager and see if there are any yellow triangles with ! in them and let us know what section that those are under.


I see no USB drivers and only my two front panel USB are showing
m
0
l
Related resources
December 2, 2012 6:08:01 AM

More of a case of you have not turned on USB 2.0 support in the bios of the board. since the four back ports are USB 2.0 standard. If your are using a 2.0 Usb device without the option of 2.0 usb support turned on in the bios the device will not be seen by windows or the USB 2.0 ports.
Once done it may require you to find the driver for the usb 2.0 ports for the board.
It will work then.
m
0
l
December 2, 2012 10:31:54 PM

weaselman said:
More of a case of you have not turned on USB 2.0 support in the bios of the board. since the four back ports are USB 2.0 standard. If your are using a 2.0 Usb device without the option of 2.0 usb support turned on in the bios the device will not be seen by windows or the USB 2.0 ports.
Once done it may require you to find the driver for the usb 2.0 ports for the board.
It will work then.


Ok, I enable it and still nothing
m
0
l
!