Sign in with
Sign up | Sign in
Your question

Computer freezze

Last response: in Graphics & Displays
Share
June 4, 2012 10:43:17 AM

hey my computer frezzed in diablo 3 after half an hour of gameplay.
then i started up mop beta to see if also was doing it there, after 10 min it was also freezing in mop.

i have geforce gtx 680 301.42, what can be the problem?

my temps were maximum 40 celsius

i have an ax 750 psu

is there a program where i can test my video card?

More about : computer freezze

June 4, 2012 12:11:01 PM

what about fur mark burn test?
Related resources
a b U Graphics card
June 4, 2012 12:48:15 PM

Sure you can use that too. It also stresses the GPU & is good indicator of the graphics card stability. Make sure that you have HWMonitor to ensure your GPU does not overheat.
http://www.cpuid.com/softwares/hwmonitor.html
June 6, 2012 10:15:08 AM

i haven't found a solution yet what can i do?
a b U Graphics card
June 6, 2012 10:32:43 AM

What is your motherboard & graphics card brand & models?
June 6, 2012 10:34:37 AM

gigabyte gtx 680 windforce 3x and asus p8z77-v
a b U Graphics card
June 6, 2012 10:42:52 AM

Okay, just a hunch. I read elsewhere that Asus p8z77-v have problem when PCIe 3.0 with 670. It may have the same problem with 680 too.

Try to set the PCIe to 2.0 via the BIOS.
I know it sucks that you pay good money to buy PCIe 3.0 feature but give it a try anyway...
June 6, 2012 10:44:45 AM

will asus fix it?
a b U Graphics card
June 6, 2012 10:53:19 AM

I am not sure if the bug is true. The few other people who have this problem & I have given this tip have not responded back. But assuming it is true, Asus have to fix it because people look forward to having the PCIe 3.0 feature ( although there is not much difference with PCIe 2.0 performance wise ).

If you can try it & confirm then we can give more definitive advise for people who have graphics instability problem.

I want to add that their problem is actually expressed as "display driver has crashed but has recovered".
June 6, 2012 3:36:47 PM

i have 1600 mhz ram and it were 1333 mhz in bios so i changed the ram to xmp, is that the right thing to do or should i just change frequency to 1600 mhz

when i change it to xmp it then was 1600 mhz

i have the kingston hyper x genesis, the color of them are silver
a b U Graphics card
June 6, 2012 5:00:02 PM

Yes, it is the right thing to do to take advantage of the XMP feature. Did it stabilize your PC when the RAM is at 1600Mhz?
June 6, 2012 5:26:10 PM

i found out that my ram isn't xmp so that may be the problem, and the timings may not be correct
a b U Graphics card
June 6, 2012 5:31:53 PM

Oh, if your RAM isn't XMP, then disable it in BIOS & see if it stabilize. If your memory is not binned for faster clock, it might be causing the freezing...
!