/ Sign-up
Your question

Gtx 560 ti 448 zotac sli with?

  • Graphics Cards
  • Gtx
  • Zotac
  • SLI
  • Graphics
Last response: in Graphics Cards
June 10, 2012 5:23:29 AM

What can I SLI the Gtx 560 ti 448 zotac card with? Someone told me any 560 will work, someone else told me that particular card has to be exactly the same... etc.

Also does anyone have a PSU they know will run these cards? I feel like I should have gone with the 560 or 550... I didn't realize how much dam power this thing pulls.

More about : gtx 560 448 zotac sli

June 10, 2012 5:34:32 AM

You can only SLI it with another 560 Ti 448 Core. It doesn't have to be a Zotac one though.

A 750W PSU should do fine.

Best solution

June 10, 2012 5:42:26 AM

560 Ti 448 ONLY, because you will need the exact same GPU... and you would not use a GTX570 or 580 because it's just stupid...
Doesn't need to be Zotac, but would still suggest to do so.
If you are not going to OC much, 750W would be enough, but if you have 2600k or similar "higher" performance CPU with OC, I would suggest going higher. Those cards and CPU goes HOT.
Related resources
a c 101 U Graphics card
June 10, 2012 7:03:51 AM

Not necessarily guys, Nvidia has said you are able to SLI a xxxGTX with a xxxGTX.


Can I mix and match graphics cards that have different GPUs?

No. For example, an XXXGT cannot be paired with a XXXGTX in an SLI configuration.

Can I mix and match graphics cards from different manufacturers?

Using 180 or later graphics drivers, NVIDIA graphics cards from different manufacturers can be used together in an SLI configuration. For example, a GeForce XXXGT from manufacturer ABC can be matched with a GeForce XXXGT from manufacturer XYZ.

Can I mix and match graphics cards is one of them is overclocked by the manufacturer?

Yes. A GeForce XXXX GTX that is overclocked can be mixed with a standard clocked GeForce XXXX GTX.

Can I mix and match graphics cards with different sizes of memory?

When purchasing a second graphics card, you should try to match the memory size so that you are ensured full value and performance from your purchase. However, while it is not recommended, NVIDIA does offer the flexibility to run graphics cards with different sized memory by using CoolBits. Using CoolBits (value set to 18), you can force both of the cards to use the lower of the two memory sizes and operate them together in SLI mode. When dissimilar memory sizes are enabled to work together using CoolBits, the effective memory size for each card becomes the smaller of the memory sizes.

The maximum load on that card is seen here:

You may want a 650W or 700W PSU if you are going to SLI

June 10, 2012 8:41:49 AM

Best answer selected by zex95966.
a c 332 U Graphics card
June 10, 2012 10:37:11 AM

This topic has been closed by Mousemonkey