Need help flashing back to stock firmware (DIR-825)

[aznpwned]

I recently flashed to DDWRT on this router and found that the LAN speeds are suboptimal and buggy. I attempted to switch back to the stock firmware through the emergency interface by holding down the reset button for 45 seconds, but when I upload the 2.02NA firmware (stock firmware - even mentions on the bottom of the unit) the router responds by saying i've uploaded the wrong image and that the hardware IDs don't match.

Any suggestions?

 

[MysticMiner]

Check on the DD-WRT forums, they can probably give you instructions, or perhaps suggest a better firmware version than the one you're using. I know that their website recommends some bad versions which their forum will tell you to ignore.