Sign in with
Sign up | Sign in
Your question

I need a PSU to fit my case

Last response: in Components
Share
December 29, 2012 7:48:04 PM

Hi, I need a power supply for atleast 400w but I'd like 500 watts.

I believe the dimensions of my current power supply is

5.9 W x 3.4 H x 5.5 D - Inches


Do you have any recommendations?

More about : psu fit case

Related resources
a c 700 ) Power supply
December 29, 2012 10:14:54 PM

No the mounting holes are std. You place the PSU with the fan inside the case and then it will work as a ventilation for the case as well, exhausting hot air from the components.
m
0
l
December 30, 2012 12:00:12 PM

So where my case holes (not the screw holes) are located it does not matter? It'll still vent properly?
m
0
l
a c 700 ) Power supply
December 30, 2012 12:06:44 PM

Yes it will.
m
0
l
a c 700 ) Power supply
December 30, 2012 3:50:55 PM

Yes if anything you have more connectors than before.
m
0
l
January 4, 2013 2:15:36 PM

http://us.ncix.com/products/?sku=60329

Since that's the PSU i'm buying, can you recommend a good gpu? One that doesn't get bottlenecked by AMD Phenom 8550 X3 2.2ghz

Can you tell me how many amps the PSU has?
m
0
l
January 5, 2013 8:58:46 PM

And also can you tell me whether an upgrade from 8550 Phenom to 9600 Phenom would be worth it?
m
0
l
January 9, 2013 9:58:15 PM

Guysss forget all my previous questions. I realized that I gave the wrong old PSU

I'm wondering whether the power supply that I'm buying
(http://www.corsair.com/builder-series-cx500-v2-80plus-c...)

has all the connectors that my old PSu has;

24 Pin ATX Connector
4 Pin ATX12V Connector
(4)4-Pin Molex Power Connectors
(2)Sata Connector
(1)4 Pin Connector - Power Floppy Drive


The only one I noticed that isn't there on the new psu is the 4 Pin ATX12V Connector. Is that true? Would I need another PSU that has one?
m
0
l
!