Compatability check

[DrossUSA]

CPU: Intel Core i5-3570K 3.4GHz Quad-Core Processor ($189.99 @ Microcenter)
CPU Cooler: Corsair H100 92.0 CFM Liquid CPU Cooler ($94.99 @ Newegg)
Motherboard: Asus SABERTOOTH Z77 ATX LGA1155 Motherboard ($224.99 @ NCIX US)
Memory: Mushkin Blackline 16GB (4 x 4GB) DDR3-1600 Memory ($109.99 @ Newegg)
Storage: Corsair Force Series 3 120GB 2.5" Solid State Disk ($109.99 @ Microcenter)
Video Card: EVGA GeForce GTX 670 2GB Video Card ($399.99 @ Newegg)
Case: Corsair 600T White Graphite ATX Mid Tower Case ($148.15 @ Mac Connection)
Power Supply: Corsair 850W ATX12V / EPS12V Power Supply ($159.99 @ NCIX US)
Other: Corsair Air Series AF120 Quiet Edition CO-9050002-WW 120mm Twin Pack High Airflow Case Fan
Other: Corsair Air Series SP120 Quiet Edition CO-9050006-WW 120mm Twin Pack High Static Pressure Case Fan
Total: $1438.08

after a lot of going back and forth with another forum mender this is what I came up with, I have looked at all these parts before just never in this config just wanted opinions on compatibility and stability still debating on using dominator platinum instead because I want to hook the whole system up to corsair link at a later date. I know the power supply is over kill for this build but it gives me the best value and saves me 60 bucks on individually sleeved cables. went with the blackline for the tight timings and low cas latency. either way let me know what you guys think. will be ordering in a couple of weeks

 

[TheBigTroll]

no bro

get this. its a better bet. i dont see the point of individually sleeved cables but you could get a ax750w psu and get a set of corsair cables for that psu
http://pcpartpicker.com/p/e7Mw

 

[DrossUSA]

no bro

get this. its a better bet. i dont see the point of individually sleeved cables but you could get a ax750w psu and get a set of corsair cables for that psu
http://pcpartpicker.com/p/e7Mw

its to appease my ocd nature, this build will have to be clean and tidy and if I have to buy the cables separately it will cost more then the AX850 which comes with them. I chose the parts I did because of the rock solid reviews and this system has to be very stable and reliable and I dont want to have to spend 2 months RMAing stuff till I get parts that work. my main question here was to see if anyone has a similar build or used similar parts to see if there is any compatibility issues.

 

[TheBigTroll]

no. the ax750w is the same thing as the 850w but with less wattage (that you wont need).

if you are really picky and want the best, here you go
http://pcpartpicker.com/p/eUJf

everything is pretty known to be reliable but there will always be bad parts that manufacturers occasionally put out

 

[DrossUSA]

no. the ax750w is the same thing as the 850w but with less wattage (that you wont need).

if you are really picky and want the best, here you go
http://pcpartpicker.com/p/eUJf

everything is pretty known to be reliable but there will always be bad parts that manufacturers occasionally put out

My apologies I was thinking of the AX650 which comes with a different cable set I will consider the AX750 but as for the rest of the build I was more worried about comparability then looking at a whole new build.

 

[TheBigTroll]

just look at my build i got for you