Bluescreens (ntoskrnl.exe problems) uploaded .dmp files Tags: Drivers Windows 7 Last response: February 7, 2012 8:36 PM in Windows 7 Share mxhmk February 7, 2012 5:51:53 PM Hi, I run a downloaded Windows 7 Ultimate x64 Using the Daz 2.1 loader. I have had problems with blue screens since ive installed it (reinstalled twice) my specs on the computer are: Windows 7 Ultimate 64-bit SP1 CPU: Intel Core i5 firstname.lastname@example.orgGHz Sandy Bridge 32nm Technology RAM 10.0 GB Dual-Channel DDR3 @ 668MHz (9-9-9-24) Motherboard Gigabyte Technology Co.., LTD. Z68XP-UD3 (Socket 1155) Graphics 1024MB GeForce GTX 560 Ti (2011 year's model) Hard drive 488GB Western Digital WDC WD5000AAKX-083CA1 ATA Device (SATA) Optical Devices ATAPI iHAS124 ATA Device B Device DTSOFT Virtual CDRom Here is my .dmp files (.zip format) : http://www.mediafire.com/?yamfzhor1aab2s5 Things ive tryed: I have updated the bios. Updated graphics card drivers updated the chipset and intel engine controller components note: When the computer goes into power-saving mode, wake it up again after 15 seconds. More about : bluescreens ntoskrnl exe problems uploaded dmp files gamerk316 a b $ Windows 7 February 7, 2012 6:53:34 PM Can't see the STOP code/error message at work; can someone post what it is? Still, if its happend across installed, RAM would be a good first bet. Run memtest86 on each stick of RAM individually and see if any have errors. m 0 l mxhmk February 7, 2012 8:36:17 PM will do that asap and come back for results m 0 l Can't find your answer ? Ask ! Publish Related resources Bluescreen Problem ntoskrnl.exe Forum Problem with upload file Forum More resources Read discussions in other Windows 7 categories Configuration Customization Drivers Security Laptops !