dmo90

Honorable
Aug 23, 2012
39
0
10,530
I've recently built my first computer and all was going smoothly for the first 5 hours or so then I started getting an error: "Display driver has stopped responding and has recovered" followed with constant freezing of my screen and pixels everywhere and occasionally the BSOD. I've done countless hours of research on forums searching for a fix but nothings worked. So I was going to RMA my graphics card but I thought I'd just check and make sure everything I put together is actually compatible. . I thought it was but a second opinion would help. Also, I read somewhere that I might need to adjust the timings of my RAM in my bios? It was set to 11 11 11 28 and I switched that down to what my ram says 9 9 9 24 but it didn't seem to help and I'm not really sure what it does. Anything else I should have adjusted manually in the bios?


Here's my build:
Motherboard-
ASUS P8H77-V LGA 1155 Intel H77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard

Graphics card-
SAPPHIRE Radeon HD 6850 1GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card with Eyefinity (100315L )

Case-
Antec Three Hundred Black Steel ATX Mid Tower Computer Case

Power supply-
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Power Supply, New Version with Build-in LED Fan On/Off Switch


SSD -
Crucial M4 CT128M4SSD2 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD)


Memory
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL


CPU-
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I53570K