WHAT SHOULD I HAVE WITHIN MY SERIAL BUS CONTROLLERS

Hello stonepicker;

What you have is 'normal' and expected.
Those are not exactly duplicates - each category has a separate function.
While each category has multiple connections - that is a very good thing for redundancy.

USB Hub Controller / standard enhanced pci to usb host controller.....x 2
USG Host Controller / standard open hcd usb host controller .....x 5
USB Hub / usb root hub.......x 7

Thanks,

I am still trying to find an answer to my USB driver problem and have questions regarding the Disk Manager

NB I have no devices plugged into any usb ports

but in disk manager there are FOUR devices listed under volume

top two dont seem to open and may not exist - virtual only ?
next is boot c which seems correct
next recovery d which seems correct

if I click top one I get only the Help signal coming up (any type of click)
If I click second one down it will allow me to do such things as allocate a letter to it, this I have tried and it will then show up in devices and printers but will not open being something of a goast removed only by deleting the letter from that item in disk manager.
In devices and printers there exist another entry llisted as
Generic cf card reader usb device - this dosnt seem to exist either and I dont know how to remove it. (I suspect this is the top device shown in disk manager)
(this item has the yellow triangle and exclamation mark - this flag comming up for any usb stick I enter - all fail to find drivers even though all is advised as up to date etc

Can you help me in the matter or the driver problem matter

What driver problem are you having?

edit; I'll reserve judgement for the moment.

Lets some more details too.
List all the hardware you know about.

Computer is medion akoya ps325 d md 8351
medion multi touchscreen monitor
medion mouse and keyboard
have nothing pluged into the usb ports
have a hp printer connected only

Can you read thru the driver failure thread shown below with a blue flag next to listings

you will see that I my memory sticks and any storage device are failing to connect correctly ie the drivers fail etc but the ports work ok with toher items such as webcam and mouse and sticks are ok in other computer.

on windows 7 64 bit as supplied with computer new mid last yr, not used much nor nessed about with.
have spyware etc provided by contract with internet provider
have run security check nothing showing

thanks for any help



PS The other listing Showin in thread listings windows 7 drivers forum next to a blue flag is

Memory stick not working in USB

thanks

Only you see your blue flags - my blue flags will be for topics I've posted in
Red flags for topics we've each read.
Just past the page address for your topic into the post and I'll be able to find it.

Ports work OK with some things? Drivers must be OK for that to happen, yes?

Webcam/mouse work correctly in USB ports - So USB ports are working normally.
USB flash drives do not work in USB ports. But USB flash drives work OK in other computers.
USB ports are good - Flash Drives are good.

To me, it looks like it's a Windows 7 problem. Not drivers.

Sory I am feeling myu way ahead with this forum and problem solving method

My other listing was in forum windows 7 drivers under

Memory stick not working in USB



Other items such as web cam find a driver and its ok but any memory stick including dongle and mass storage drives get a failure
The item will show up in devices and printers section but will have yellow triangle and exclamation mark on them.
as you will see from other listing I have tried removing them installing the latest drivers from facilities offered by computers guide but everything showing correct but still failing despite on and off of computer etc.
In this thread after your first repply I have listed a phantom which I cant remove etc maybee its something to do with this and its listings

That 'phantom' has nothing to do with the problem.

http://www.tomshardware.com/forum/35980-63-memory-stick-working

What is this 'Disk Manager'?

Following the computers help system i Found disk manager from start rh click computer disk manager is located

So this window you're working in --- says 'Disk Manager'?

Following the computers help system i Found disk manager from start rh click computer disk manager is located


Start-Rh Computer-Maneger-storage section for Disk Manager.

I have only been in this section looking for a problem - I needed to try allocating a number to the device to see if that was the problem but it wasnt.
I am querys to see if this section is actualy correct from other peopls knowlege, I have never been this road before, but will correct the problem given the help and tools needed

So you're talking about Computer Management and it looks something like this?

Yes but the top two items dont seem correct please see my entry above in this thread.
I would post it on this repply like you have done but dont know how to do this

Provide details on the 'top two'

Yes but the top two items dont seem correct please see my entry above in this thread.
I would post it on this repply like you have done but dont know how to do this



On the top two there is nothing except a small oblong blob I think which indicates a storage device, there are no storage devices currently intered in any usb port

If you tell me how you provioded the illustration of yours sent before, I will try and send copy to you

Is the 'oblong blob' similar to Disk2 in the lower window of my screenshot?

No
The entry is without number or description only the oblong shape
I will send it to you like you did if you can give the exact way I must do this.

To get a copy of your screen:
Start menu-> Accessories-> Snipping Tool
Use your mouse to draw a box around the area you want to capture - Click and hold the left button down to hilight the area you want. Release the button when you have the shape correct.
Save the image to your desktop.

Then you have to upload the image to a picture hosting site like: http://imgur.com
Upload the image from your computer. Then use the BBCode option and paste that into your post.

I can crawl thru barbed wire quicker..
I will try this out but it may be quicker for me to just type what I have on the screen.
I may be looking in the wrong direction with the problem I have - The computer sees the memory stick when plugged in then advised it cant get a driver etc as explained. The image of the stick will still show up but the warning triangle etc it shows thers some thing wrong and this is the bit I seem to be unable to find.
While you give this further thaught I will try out your advisory but dont hold your breath

Have you tried a brand new USB stick that has never been in any of your other computers?

Yes it just was the same.
I have followed your advisory and pressed the BBcode and got save.
Now where do I pick it up or past it from ...never been beyond basics with computers

Paste it into the post.
Right mouse click and paste

I could follow you as far as the imgur site with it shown and could see the BBCode box which I ticked but dont know from there
ie what must I do exactly


How will I get a cut from the site to paste
I take it you mean right click on this box after I have managed a cut

Your email

I got save from the site but just the above ..which states your email... when tried to paste.. an error so now
need to know how to cut and paste the site correctly
thanks

Did you see your image uploaded?

Then use BBCode option off to the right.

That will let you paste the right code into your topic.

I showed all of screen set out similar to the one you first showed, I presed the save and it stated saved ..corrected enter copy instead of save
looked to right but couldnt find any option nor could I give any entry or alternation to the box adjacent to BBCode
I am missing something sory for this trouble

Did you click the spot where my cursor arrow was in the picture above?

Yes have done so several times dont know what hapens next

Didnt set any address or anything like that - there didnt seem to be a way to do so

Paste it into the post.
Right mouse click and paste

What you are seeing there is Disk 0 = 1 physical hard disk with four partitions.
Your 1TB HDD = Disk 0 = 900GB for your primary boot drive C: 30GB for your Recovery drive D:
You also have a 100MB OEM partition and a 1GB partition.
Plus the DVD/CD drive - currently empty.
-> Nothing on Disk 0 has anything what so ever to do with USB drives.
What you are seeing in the top window is all about the hard disk.

Now - next to the Disk0, over on the right, you can see a window slider that says where is part of the window not seen, under the CD/DVD drive. Move the slider and uncover the rest of the window. Plug one or your USB sticks in and see if you can find it in that lower window. For example here you can see 4 USB drives and the DVD drive with a disk in it:

I entered a memory stick and it showed up between the two lower placements.
I opened up the slider but nothing further to view
I am currently running my computer with thesignature enforcement disabled so that I can look at memory sticks which can be opened in this mode

I can see the stick entered correctly like yours below 0
it is disk 1 with its name correctly entered

signature enforcement disabled

did you know about that option all along?

No I discovered it tonight when I found the code listing when I was brave enough to look harder at all of the components within the field.
When I re start my computer I expect the error to return, but tonight I have mooved all stick info onto one big device.
It still seeems to be a driver signature error 52 do you have any guidence on how I can cure this without a download which provids the F8 configuration

I've never seen a #52 on an motherboard's USB deviced before.

Get an ID (make and model) of the motherboard you have installed.
Use CPU-z and find the info on the Mainboard Tab.
http://www.cpuid.com/softwares/cpu-z.html
Manufacturer / Model / Chipset
BIOS Brand / Version / Date

Also get a screenshot of the USB driver details.

Do you want me to download and scan etc as the site seems to offer, or do I download and actually look for details of the motherboard, assuming I can find it easily. (Will the details be in my medion booklet or accessable from my computer itself without the need of a download)

As I suspected after re booting the computer normaly the fault just returned.
I may have to follow this thru tomorrow it been a long day

For the moment do nothing but capture data and report when able.

may not have sent last one correctly will repeat

I downloaded from the site recommended
ran the download
although it stated it was a free site, it requested payment to fix reported errors
didnt find anything to report regarding the motherboard etc so obviously I am not on the correct track - will need further guidence

Sorry, have no idea what you just said there.

IOt was where we lest off yesterday and the information you indicated would be of help.
Mainly the web site you recommended, I think there must be an error in the details or how I understood/implimented them

Ref the website, I used the top information which is about speeding up your computer, I couldnt figure any other download on the site and I need further help to get it sorted

ran the download - what download?
reported errors - what errors?

Ref the site you gave yesterday evening to gain information relating to motherboard etc.
I pressed on your link and I got to that site.
At the top it offers a download.
I figured that was what you requireed me to get in order to provide the details required.
I downloaded, and RAN the download and was offered a fix pack for a payment of around £19 or so. At this stage I thaught I had something wrong since the download was all about speeding up the computer etc.
Hence I didnt make progress as anticipated.
If you re visit site you will easily see how this misunderstanding has come about etc

CPU-z is free and available on that link.

You downloaded and ran something else if it asked for £19.
What did you run? What did it say on the program window?
What errors did it report?