EVGA GTX 670 wont bolt down

[monorion]

Hello everyone,

I am in the process of putting my PC together bujt i am stuck, everything is installed the only thing it when i insert the GPU the holes to screw it town to the back dont line up is there anything i can do about this? i tried removeing it multiple times and still wont line up, i also tried the other PCI slot and still nothing

mobo: ASRock Z77 extreme4
case: Cooler master HAF X
GPU: EVGA GeForce GTX 670

thank you for the help

 

[Sunius]

Could you take a picture? Can't really understand what you're saying.

 

[monorion]

Yes here is a pic sorry if its hard to see

as you can see the red boxes are where the thumb screws screw into on the backk of the case, as you can see they dont line up and the GFx card is very lose not sure if this is the reason why my PC is booting

 

[redeemer]

Are you sure that your card is seated in the pcie slot properly? Yeah just make it line up using a bit of force then screw it in place, this kind of thing is normal.

 

[Sunius]

Use force to make it align.

 

[AlmostAscended]

I have the EXACT same problem as OP. My case is a Cooler mater 690 II advanced. I'm beginning to suspect that Coolermaster didn't design the case as well as they should have.

And please, DON'T tell me to "use force". It doesn't work. To bend it far enough to make the holes align means that you'll pop your card off the slot, or break something.