- Jan 29, 2001
- 8,713
- 4
- 31,815
I also posted this in the WIN2000 forum, apologies for any boredom created.
I have a feeling others have had this one, but I feel I'm halfway to the answer.
Win98SE and all hardware stuff installed fine.
Followed W2K install instructions (allow me to choose own partiton etc.)
On re-boot I get message on BSOD:
***STOP: 0x0000007B (0xF2463848, 0x00000000, 0x00000000) INACCESSIBLE_BOOT_DEVICE
I tried a boot from CD-ROM and it got me farther, but it then told me I had no fixed DDs. I know I have and they work fine.
2 x IBM 60GXP 40GB - <b>RAID 0</b>
Is it the HPT370 Win9x driver which is causing this?
All suggestions welcome as I can easily re-format and take a different set of installation steps.
Cheers!
<b><font color=blue>~scribble~</font color=blue></b>
I have a feeling others have had this one, but I feel I'm halfway to the answer.
Win98SE and all hardware stuff installed fine.
Followed W2K install instructions (allow me to choose own partiton etc.)
On re-boot I get message on BSOD:
***STOP: 0x0000007B (0xF2463848, 0x00000000, 0x00000000) INACCESSIBLE_BOOT_DEVICE
I tried a boot from CD-ROM and it got me farther, but it then told me I had no fixed DDs. I know I have and they work fine.
2 x IBM 60GXP 40GB - <b>RAID 0</b>
Is it the HPT370 Win9x driver which is causing this?
All suggestions welcome as I can easily re-format and take a different set of installation steps.
Cheers!
<b><font color=blue>~scribble~</font color=blue></b>
Facebook
Twitter
Instagram