Hello community, I just assembled my new build (one of my two ram sticks was dead 
).
So now I boot up my PC for the first time and insert my Windows 7 disc and... nothing, nada, zilche. My DVD burner lights up and seems to realize the disc is in it, though I'm unsure if it actually is reading it.
I tried to navigate my BIOS, and tried to change my boot priorities, but I still couldn't get it to recognize the disc actually being there and just kept getting the message to reboot, which did nothing. After about two hours of trial and error (lots of trial, and all of it error), I couldn't figure out what was wrong, I really need some help here and don't really know where to post this, which is why I posted it under build, I'm unsure as to whether or not this would be better suited under the Windows 7 subforum.
I've read all of my manuals, searched online, and tried everything I could think of, but nothing gave me any results.
Anyway, here's my build if it helps:
Case: Rosewill Thor V2
RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBXL (One is not currently working...)
Motherboard: ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Hard Drive: Seagate Barracuda ST31000524AS 1TB 7200 RPM 32MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
PSU: Antec High Current Gamer Series HCG-750 750W ATX12V v2.3 / EPS12V v2.91 SLI Certified CrossFire Certified 80 PLUS BRONZE Certified Active PFC Power Supply
CPU: Intel Core i7-3770 Ivy Bridge 3.4GHz (3.9GHz Turbo) LGA 1155 77W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I73770
GPU: ZOTAC AMP! ZT-60302-10P GeForce GTX 670 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
Monitor: ASUS VS Series VS247H-P Black 23.6" 2ms LED Backlight Widescreen LCD Monitor 300 cd/m2 50000000:1 (ASCR)
).So now I boot up my PC for the first time and insert my Windows 7 disc and... nothing, nada, zilche. My DVD burner lights up and seems to realize the disc is in it, though I'm unsure if it actually is reading it.
I tried to navigate my BIOS, and tried to change my boot priorities, but I still couldn't get it to recognize the disc actually being there and just kept getting the message to reboot, which did nothing. After about two hours of trial and error (lots of trial, and all of it error), I couldn't figure out what was wrong, I really need some help here and don't really know where to post this, which is why I posted it under build, I'm unsure as to whether or not this would be better suited under the Windows 7 subforum.
I've read all of my manuals, searched online, and tried everything I could think of, but nothing gave me any results.
Anyway, here's my build if it helps:
Case: Rosewill Thor V2
RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBXL (One is not currently working...)
Motherboard: ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
Hard Drive: Seagate Barracuda ST31000524AS 1TB 7200 RPM 32MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
PSU: Antec High Current Gamer Series HCG-750 750W ATX12V v2.3 / EPS12V v2.91 SLI Certified CrossFire Certified 80 PLUS BRONZE Certified Active PFC Power Supply
CPU: Intel Core i7-3770 Ivy Bridge 3.4GHz (3.9GHz Turbo) LGA 1155 77W Quad-Core Desktop Processor Intel HD Graphics 4000 BX80637I73770
GPU: ZOTAC AMP! ZT-60302-10P GeForce GTX 670 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready SLI Support Video Card
Monitor: ASUS VS Series VS247H-P Black 23.6" 2ms LED Backlight Widescreen LCD Monitor 300 cd/m2 50000000:1 (ASCR)
Facebook
Twitter
Instagram