andynguyen12

Distinguished
Sep 29, 2010
52
0
18,630
To start off, I'm a first time builder. Ok so, I hooked everything up, power it up, and well everything was running great. Graphic card, fans (except for the front case fans), PSU,...all running good, well the problem is the monitor keep appearing the "Check signal cable" message, and I have no idea what I did wrong. Then I took out the graphic card and tried the on-board video(p8z68-v/gen3 mobo), and the darn message still there. The graphic card is GTX560 Ti. And please don't give me this thread: http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems because I reviewed for the third time and there is nothing in there that I find was gonna help me with the video problem.
And I forgot to say the problem is definitely not from my monitor
 

andynguyen12

Distinguished
Sep 29, 2010
52
0
18,630
Nevermind :p Thanks I just got it to work by using this extremely suspicious method: REMOVE YOUR POWER CORD AND HOLD THE ON BUTTON FOR LIKE 30second TO A MINUTE AND THEN CONNECT IT BACK AND TURN IT ON.