Upgrading pc, is this a good set?

Donkeyface

Honorable
Sep 9, 2012
7
0
10,510
As the title says, I'm upgrading my pc's CPU and also mobo cause my current one is an AMD one. I'd like to know if I'm buying the correct things and if I'm getting the most for this money.

I'd like to have this mobo cause it includes ram too, but I'm open to all suggestions. I'm only using it for gaming and general web surfing.

This is what I came up with.


MOBO +8gb RAM
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157293

CPU 
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116504

Heatsink
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103100

Thermal paste

http://www.newegg.com/Product/Product.aspx?Item=N82E16835100007
 

idroid

Honorable
Aug 18, 2012
1,525
0
11,960


Fan position doesn't matter a lot.... what matter most is the heatskin itself, the 212 EVO or the HAVIK 120 (specially the HAVIK) are quieter than the cooler you linked and perform equal (the HAVIK performs better than both)
 

Donkeyface

Honorable
Sep 9, 2012
7
0
10,510
I just looked up the dimensions for the coolers and it looks like many won't fit in my current case, and perhaps the new mobo won't either.
I have this
http://www.newegg.com/Product/Product.aspx?Item=N82E16811156237

18.25" x 7.25" x 16.75"

Are the dimensions of the case. 
The mobo has a 12" height and there's just under 13" of room left in my case including my PSU.

So would I also need a new case as well or would I be okay with this as long as I get a decent CPU cooler that fits?
 

Donkeyface

Honorable
Sep 9, 2012
7
0
10,510
I got a follow up. I just finished installing everything, and as far I know I did it correctly. But when I start it up it says it can't startup and it goes into repair mode but it just keeps going on forever. I did done googling and found that this happens sometimes when u install a new CPU or mobo, and that I'd have to do a clean installation. Now I tried doing that by rebooting with the disc in the pc but it doesn't pick it up. Gives me option to repAir and to start normally which does nothing but restart the pc.
How can I run the disc if it keeps doing that now? :/