Tower fans 2 not working after Installing SSD Tags: Homebuilt SSD Systems bosa September 19, 2012 5:57:18 PM I put in a new SSD I got Plextro M5S 128gb, when I installed the card I did not see that a Sata cable was touching one of the Big Front bottom fans on the tower. I turned on my computer and I heard a loud noise and I knew right away something was touching the Fan. When I went to correct the error the fans already shut down. Two fans total are knocked out one on the bottom of the tower and one on the back top exhaust. The fan that actually was obstructed is fine for some reason... So did I short out the other two fans I already replaced the power cord going to the fans.. More about : tower fans working installing ssd Can't find your answer ? Ask ! Publish Related resources : ForumInstalling SSD after the fact? ForumCrucial m4 / Gigabyte z68-ud4-b3 : Issue after installing the ssd ForumNew Gaming Tower predominantly used for GW 2 for under £1,000 (VAT not included) ForumBuiling My First Tower ForumFirst build fans , POST, and installing Windows 7 ForumCase fans no longer turn on after installing motherboard ForumLights and fans work , no noises or booting ForumHome built Desktop won't post after working for a year ForumHELP! Windows wont start - after cleaning tower ForumStrange Issues after Installing SSD Forum$1000 budget build ( tower ) and $150-200 (Monitor) Forum$1800 Build (desktop tower only) ForumNew Big Tower help, advice please ForumAfter installing AMD drivers Windows won't boot ForumRetrieve data from Marvel RAID after migrating to SSD ForumNew tower take 2 ForumPCI compatibility question ForumNew desktop CPU, i5-3570k, GTX670, 128 GB SSD, Budget 800-1200 ForumBlack screen after BSOD...replaced video/memory/HDD, no display/bios ForumSystem won't boot after new CPU Cooler More resources Read discussions in other Systems categories Homebuilt New Build Prebuilt Cases Power Supplies RAM CyberPower !