Friend

[evoke_31]

Hello,
i jus wanted tu ask u guys whether i can use my corsair 8 gb vengeance and kingston 133mhz 4gb ram together in my motherboard ...would it match without any problem ????

 

[Herr_Koos]

As long as the voltages, clock speeds etc are the same, they should work together well. I've mixed Samsung and Kingston without problems.

What are the detailed specs for each?

 

[evoke_31]

kingston 4g ram
DDR3-1333/PC3-10600
DIMM Memory Module
240-pin Configuration
9-9-9 CAS Latency
1.5 V Specified Voltage
Unbuffered
64 x 512 MB DRAM Structure


corsair vengeance 8 gb
DDR3 1600/PC3 12800
DIMM Memory Module
240-pin Configuration
10-10-10-27 CAS Latency
1 x 8 GB DRAM Structure

 

[Herr_Koos]

The memory will run at the speed of the slowest stick present, so the Corsair RAM will be downclocked to 1333 in this case.

 

[evoke_31]

so should i go for it...??

 

[Herr_Koos]

Have you already bought the new RAM? Which one of the two do you have and which are you planning to get?

 

[evoke_31]

i bght it tudae nly....corsair 8 gb vengeance n i already hav 4 gb kingston in my pc :|
im confsd

 

[Surgeking]

all you need is 8gb. worst case scenario you only use the 8gb stick. actually that might be optimal.

 

[Herr_Koos]

i bght it tudae nly....corsair 8 gb vengeance n i already hav 4 gb kingston in my pc :|
im confsd

Next time you should do a bit more research before buying.

Put the new RAM in and see what happens. The PC will work fine but performance may not be 100% optimal. If it doesn't work, take the Kingston memory out and try with the Corsair only.

 

[evoke_31]

thank you guys ^_^