Sign in with
Sign up | Sign in
Your question

Rightmark cpu clock problem

Last response: in CPUs
Share
February 3, 2013 10:47:04 PM

hi i used progrm RMClock.exe (rmclock_235) RightMark CPU Clock Utility (RMClock) 2.35

i have cpu "core 2 duo t8100" with 2100 Mhz clock
i noticed that when i exit the program the cpu clock goes to 800 Mhz
and when i start RMClock.exe it goes again to 2100 MHz

i wanted do have 2100 mh without using RMClock.exe as it is normal
and i used RMClock_WipeOut.reg but unfortunately
after this the cpu is always on 800 MHz
no mater what p-state i set in the management page

please help me to restore ability of my cpu to work on 2100Mhz without RMClock.exe

thanks

please help

best regards
February 3, 2013 10:58:10 PM

hi
i am not allowed to edit or delete so i write again with corrections
i used progrm RMClock.exe (rmclock_235) RightMark CPU Clock Utility (RMClock) 2.35 as described in this thread:http://www.tomshardware.co.uk/forum/264222-10-intel-t83...

i have cpu "core 2 duo t8100" with 2100 Mhz clock
i noticed that when i exit the program RMClock.exe - the cpu clock goes to 800 Mhz
and when i start RMClock.exe it goes again to 2100 MHz

i wanted do have 2100 mh without using RMClock.exe as it is normal
and i usedresetting of settings of the program but unfortunately
after this the cpu is always on 800 MHz
no mater what p-state i set in the management page.
seems the program is not perfect so

please help me to restore ability of my cpu to work on 2100Mhz without RMClock.exe

thanks

please help

best regards
!