Sign in with
Sign up | Sign in
Your question

Power supply issues

Tags:
  • Power Supplies
  • Powersupply
  • Components
Last response: in Components
Share
February 8, 2013 8:06:16 PM

Hello I have a gateway DX 4710-09 the SN is PTG320X0058521083C2700 SNID is 85206764427 I got a Corsair CX430 Powersupply and I am running into some issues I connected the 24 pin and the sata cables the old power supply has a 4 pin connector that has two on top and two on the bottom but my power supply doesnt have that I guess its the CPU???? my old powersupply has the 24pin cable sata cords and that 4 pin two top and two on the bottom but my new power supply has like 10000000000000 extra cords what do I put in the 4 pin slot

More about : power supply issues

a b ) Power supply
February 8, 2013 8:26:52 PM

take the eps connector (see pic)
give it quick snap at the top and you will get two ATX (4-pin connectors). its not broke, its a dual purpose power connector
stick one of the new 4-pins into your 4-pin CPU connector

m
0
l
a c 148 ) Power supply
February 8, 2013 8:41:40 PM

The 8 pin lead labeled CPU will fit in the 4 pin slot. No need to try to break it.
Look carefully, and you will see that it only fits just one way.
The latch side will be still on the latch side.
The unconnected parts will just protrude.
This is actually a clever inexpensive way to provide for motherboards with either 4 or 8 pin cpu connectors.
m
0
l
!