Sign in with
Sign up | Sign in
Your question

Display slow in dual processor

Last response: in Graphics & Displays
Share
August 10, 2012 2:35:21 PM

Hello,
i bought a 5600 dual processor with intel workation board s5520sc, 16gb ram, zotac gt52o graphics card for 3ds max rendering.
rendering is fast, but display is very slow.
how can i improve display
a c 291 U Graphics card
August 10, 2012 3:59:09 PM

Is that GT 520? If so, there's your issue. You need to upgrade the graphics card. I'd suggest Nvidia Quadro 600.
m
0
l
a c 181 U Graphics card
August 11, 2012 4:04:28 AM

^+1
The nVidia GT 520 is not the card for your prodject. Use the card suggested by sunius and you will see a night and day change. Good luck to you.
m
0
l
Related resources
a b U Graphics card
August 11, 2012 4:20:42 AM

Sunius said:
Is that GT 520? If so, there's your issue. You need to upgrade the graphics card. I'd suggest Nvidia Quadro 600.



+1. Whoever put this together for you really cheaped out on the GPU.
m
0
l
August 11, 2012 6:51:23 AM

i have changed to quadra 600, but no use. now i am planning to buy gtx 560 TI, will it be ok?
m
0
l
a c 291 U Graphics card
August 11, 2012 10:05:43 AM

Did you install quadro drivers? I've personally compared Quadro 600 with my own GTX 560 Ti, and Quadro 600 was displaying things much smoother and faster when there were too many polygons on the screen.
m
0
l
!