Sign in with
Sign up | Sign in
Your question

NZXT sleeved LED expansion slot cover really loose

Last response: in Components
Share
a b ) Power supply
February 13, 2013 10:55:42 PM

Hi gang, just installed an NZXT sleeved LET kit in my rig and I'm having issues with the expansion slot cover. It's really loose. I just wanted to know if this is a common problem or if I'm just really sucking at putting it in?

My case is a CM Storm Trooper and I'm trying to get it to fit in the lowest expansion slot.
As you can see in the pic below, there's a shadow where it's loose and not really fitting that well.


I'll dust it off when I have this figured out :) 
a b ) Power supply
February 13, 2013 11:30:44 PM

bouncedk said:
Hi gang, just installed an NZXT sleeved LET kit in my rig and I'm having issues with the expansion slot cover. It's really loose. I just wanted to know if this is a common problem or if I'm just really sucking at putting it in?

My case is a CM Storm Trooper and I'm trying to get it to fit in the lowest expansion slot.
As you can see in the pic below, there's a shadow where it's loose and not really fitting that well.

]http://s20.postimage.org/xxhe2o2yh/nzxt_led.jpg
I'll dust it off when I have this figured out :) 

see if the card itself can be moved..most times they use two screws..losen the screws and slide the card a bit it may make the card sit better in the slot.
!