Sign in with
Sign up | Sign in
Your question

Cpu Upgrade on Hp Allinone

Last response: in CPUs
Share
February 20, 2013 11:25:22 AM

Can i upgrade my cpu on my Hp MS228IT: this is the specification of my pc:
Now mount an a AMD Athlon(tm) II X2 250 Socket AM3 (938)

Spoiler
Chipset
-------------------------------------------------------------------------
Northbridge AMD 780G rev. 00
Southbridge AMD SB700 rev. 00
Mainboard Model CapironaD Socket AM3 (938)

Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual, (Unganged)
Memory Frequency 400.0 MHz (1:2)
CAS# latency (CL) 6.0
RAS# to CAS# delay (tRCD) 6
RAS# Precharge (tRP) 6
Cycle Time (tRAS) 18
Bank Cycle Time (tRC) 24
Command Rate (CR) 2T
Uncore Frequency 1600.0 MHz


Thnks

More about : cpu upgrade allinone

a c 117 à CPUs
a b } Memory
a b α HP
February 20, 2013 12:51:28 PM

HP does not support any CPU upgrades to that computer.The "Upgrading and Servicing Guide" for your system, found here http://h10032.www1.hp.com/ctg/Manual/c02043554.pdf mentions nothing of CPU replacement
The major issue with upgrading a CPU in an All-in-One machine is heat. The CPU in currently in your system is a low power model CPU which has been underclocked to 1.6GHz but only produces 25W - the other Athlon II x2 CPU's in that series run at about 3.2GHz and produce 65W, that 40W difference is huge when it comes to dissipating the heat produced. The design of the All-in-One does not allow for 'extra' heat dissipation
Hope it helps to clarify anyway
!