Case fan help!

I'm currently using this fan:
230x230x20mm
http://www.techbuy.com.au/p/138108/COOLING_FANS_GREATERTHAN_120MM/ThermalTake/AF0047.asp

It just recentely started crapping out on me and I am looking for a replacement.

I am wondering if these will fit onto my computer:
230x200x30mm
http://www.frozencpu.com/products/14445/fan-935/BitFenix_Spectre_Pro_230mm_Fan_-_Blue_LED_BFF-LPRO-23030B-RP.html?tl=g36c331s1394#blank

and if the one above can't fit, the best alternative I found would be this one:
230x230x30mm
http://www.frozencpu.com/products/12875/fan-848/BitFenix_Spectre_LED_230mm_Fan_-_Blue_BFF-BLF-23030B-RP.html?tl=g36c331s1394#blank

Basically I need to know if either will fit, or if there are better options that I simply just couldn't find myself.
Thanks for any information given!
12 answers Last reply
More about case help
  1. well all the sizes are the same except for the width, shich is a difference of a mere 10mm...So unless the fan you have now is nearly touching something inside your case, you should be fine.
  2. the bitfenix 200mm spectre pro is a great 200mm fan. it is 200x200x25, so a lot closer to your current. what case do you have at the moment?
  3. Coyote4522 said:


    As long as the fan in it now isn't almost hitting the top of your CPU cooler, or Graphics card, or anything else you have in there then either fan should fit in fine.
  4. bitfenix also do a 230mm version that will fit just fine, also shifts 156 cfm and is noise rated at around 40db at max rpm. the do a whole bunch of led colours, but also the plain unlit version.
  5. roaddoc326 said:
    As long as the fan in it now isn't almost hitting the top of your CPU cooler, or Graphics card, or anything else you have in there then either fan should fit in fine.



    http://www.frozencpu.com/products/14445/fan-935/BitFenix_Spectre_Pro_230mm_Fan_-_Blue_LED_BFF-LPRO-23030B-RP.html?tl=g36c331s1394#blank

    So this one will work? sorry I posted two so I gotta make sure! :D
  6. phate1337 said:
    bitfenix also do a 230mm version that will fit just fine, also shifts 156 cfm and is noise rated at around 40db at max rpm. the do a whole bunch of led colours, but also the plain unlit version.



    Got a link to those?
  7. what country you want it in? uk/usa?
  8. Coyote4522 said:


    Yep, it will screw in just fine just it will stick down into your case a small bit more than the old one.
  9. also, pick a colour!
  10. I'm going blue!
  11. think you found it already! good fans, used them of a few builds for clients
Ask a new question

Read More

Cases Computers Fan Components Product