Sign in with
Sign up | Sign in
Your question

How do reset this Monitor to factory settings. PLS

Last response: in Graphics & Displays
Share
August 18, 2012 8:32:31 AM

Hello,
I have a Proline 19" 9klr monitor
Monitors with exec same specs are:-
AOC 9KLR CRT Monitor
Envision 9KLr 19in Flat CRT Monitor

Unfortunately my children messed with the OSD and i am unable to get a proper display(ALL SKEWED) after hours of fiddling with the OSD.

I cant find how to reset the display to its original factory settings.

Additional Keyword 9KLR
Actual Diagonal Screen Size 19in
Bandwidth 200 MHz
Certifications TCO92
Certifications TUV-GS
Certifications UL Listed
Certifications EPA Energy Star
Certifications CSA (Canada)
Certifications FCC
Certifications FDA
Certifications DPMS (VESA)
Controls On-Screen Menu Display
Controls Brightness
Controls H/V Position
Controls Contrast
Controls H/V Size
Controls Pincushion Distortion/Balance
Controls Recall
Controls Parallelogram
Controls Trapezoid
Controls Color Temperature Selection
Controls H/V Moire
Controls Language Select
Controls Degauss
Controls Rotation
Controls Zoom
Display Memory Settings 8 Preset
Display Memory Settings 20 User
Dot/Stripe Pitch .25mm
Input Voltage Universal 120/220 VAC
Input Voltage 50/60 Hz
Interface Type(s) DB15 (VGA)
Manufacturer AOC International
Maximum Resolution Supported 1600 x 1200
Misc Features Tilt and Swivel Base
Misc Features Plug and Play
Power Consumption 130 Watts
Scanning-Horizontal Freq 30-95 kHz
Scanning-Vertical Freq/Refresh 50-160 Hz
Screen Type Flat Screen
Type Device Color Monitor
Video Standards VGA
Video Standards SVGA
Video Standards XGA
Viewable Diagonal Screen/Image Size 18in

CyberFox
a b U Graphics card
a b C Monitor
August 18, 2012 11:08:04 AM

Recall.................
That is the key that sets the monitor back to factory defaults.
m
0
l
a c 291 U Graphics card
a b C Monitor
August 18, 2012 11:15:36 AM

I'm pretty sure you can set "default settings" at the monitor menu.
m
0
l
Related resources
a b U Graphics card
a b C Monitor
August 18, 2012 12:50:20 PM

And Degauss set the picture to it's least. Careful when you hit the degauss since it sends a magnetic jolt throughout the screen. Resetting the whole magnetic environment n it.
m
0
l
August 18, 2012 1:24:21 PM

alyoshka said:
Recall.................
That is the key that sets the monitor back to factory defaults.


Did try that unfortunate only recalls a previous setting(Not factory default) which is kinda odd.


m
0
l
August 18, 2012 1:30:13 PM

Sunius said:
I'm pretty sure you can set "default settings" at the monitor menu.


Yes you are so right. I've tried so many things at the OSD menu and in the proses caused more distortion of the display :( 

Still hopefull someone out there might have a solution to my problem.
m
0
l
August 18, 2012 1:31:25 PM

alyoshka said:
And Degauss set the picture to it's least. Careful when you hit the degauss since it sends a magnetic jolt throughout the screen. Resetting the whole magnetic environment n it.


Degauss is just letting the screen shiver(like it should do) :wahoo:  but not changing the display at all.

Thanks people for the advise so far but none is working.
m
0
l
!