Hey guys,
Just recently I bought new Kingston Hyperx performance RAM to replace my old crappy 1333mzh ram, but I ran into a problem. Once i install the new RAM modules and power up the PC, it stays on for 5-10 seconds and shuts down. After that it restarts itself repeating the cycle. This is what the PC does also when no RAM at all is installed. My motherboard does seem to support 1866mzh RAM, as far as the specifications go, but something isn't quite working. Have you guys got any suggestions?
PC specifications are:
i5 3570k @4.3ghz OC
Nvidia GTX 660ti MSI Power Edition
650w Coolermaster PSU
2x 7200rpm HDD
120gb kingston HyperX SSD
NZXT tempest evo case
8gb ddr3 ram
MSI Z77a g43 motherboard
And this is the new RAM
http://www.jimms.fi/tuote/KHX18C9T2K2%2F8X -sorry couldn't find it anywhere else so it's in Finnish.
-The PC works when i install the old ram, so all the other components are fully working...
Just recently I bought new Kingston Hyperx performance RAM to replace my old crappy 1333mzh ram, but I ran into a problem. Once i install the new RAM modules and power up the PC, it stays on for 5-10 seconds and shuts down. After that it restarts itself repeating the cycle. This is what the PC does also when no RAM at all is installed. My motherboard does seem to support 1866mzh RAM, as far as the specifications go, but something isn't quite working. Have you guys got any suggestions?
PC specifications are:
i5 3570k @4.3ghz OC
Nvidia GTX 660ti MSI Power Edition
650w Coolermaster PSU
2x 7200rpm HDD
120gb kingston HyperX SSD
NZXT tempest evo case
8gb ddr3 ram
MSI Z77a g43 motherboard
And this is the new RAM
http://www.jimms.fi/tuote/KHX18C9T2K2%2F8X -sorry couldn't find it anywhere else so it's in Finnish.
-The PC works when i install the old ram, so all the other components are fully working...