Sign in with
Sign up | Sign in
Your question

HP Slimline S5-1358 Support Sapphire 7750 Graphic Card

Last response: in Graphics & Displays
August 21, 2012 7:49:57 AM

Hello, I want to insert a Graphic display card "Sapphire 7750 low profile display card into HP Pavilion slimline S5-1358. But I don't know whether there is any empty slot to insert this card or not? and also I want to know in case when there is actually empty slot which will be disabled or enabled by HP Manufacture? Hope you can help me solve this issue
a c 189 U Graphics card
August 21, 2012 7:54:58 AM

I highly doubt that the power supply would be able to support a 7750, even if it does have a very low power draw.

And I don't think they make "low profile" 7750's yet for the public that is.
August 21, 2012 8:09:45 AM

low profile 7750 has been public. The Slimline s5-1358's power supply is 270V, the 7750 graphic card is only 90v. Is it ok?
Related resources
a c 189 U Graphics card
August 21, 2012 8:21:26 AM

GPU power consumption is measured in watts, not V. If you have a 270W PSU, you can take the chance and run it and it will probably do fine, but that is a risk for you to take.
August 21, 2012 8:57:15 AM

Hi all friend, The followings are some HP Slimlines s5-1358 Specification's information.


Joshua-H61-uATX (Joshua)


Intel Core i5 3470

Video graphics

Intel Graphics Media Accelerator HD Integrated graphics

*Integrated video is not available if a graphics card is installed.

· Integrated graphics: Intel Graphics Media Accelerator HD (DX10.1)

· Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.

· Use of both the DVI and the VGA ports at the same time is supported.

You can refer to the detail specification of 1358 as this link

Besides, the power supply for HP 1358 is as follows.
Internal 270W (100V-240V)

The overall review of 7750 low profile

Total Power Usage of 7750 Full card:

According to HP Slimlines 1358 specification and 7750 Low profile specification, you feel whether 7750 low profile can support 1358 or not, in term of slot and power supply. Hoping you can solve my issue and thank for all of you.