Sign in with
Sign up | Sign in
Your question

Hard drive won't boot after installing new power supply

Last response: in Components
Share
March 4, 2013 2:11:01 PM

Hello, after installing new power supply on a older Presario S6000NX the computer will not boot. I can hear the HD start to spin up it stops and keeps trying again/again.HD seemed to be working prior to PSU failure.
March 6, 2013 8:32:49 AM

Check all the cables and connections from the new PSU to the motherboard and to the various devices - make sure all the connectors are firmly in place.

Check that the output-wattage of the new PSU is at least as high as the old one, preferably higher.
m
0
l
!