HT link and performance Tags: CPUs Performance Processors ASrock Last response: March 14, 2013 3:36 PM in CPUs Share johnnsti08 March 5, 2013 7:28:33 AM I just realised, that my mobo is an AM2+ (ASROCK N68C-S UCC) but my processor is AM3 (X6 1045T). Therefore the HT link that i can run is 1000MHz, though the 1045T can do 2000. Will my performance be decreased? More about : link performance | E-mail me updates | Report abuse Reply to johnnsti08 Register or log in to remove clutchc CPUs Master March 14, 2013 3:19:49 PM Yes it will... on paper. I doubt you would notice any difference in gaming though. | Report abuse Reply to clutchc rolli59 CPUs Master March 14, 2013 3:36:42 PM ^+1 agreed measurable by benchmarking but not noticeable. | Report abuse Reply to rolli59 Ask the community Post an answer Tom's Hardware>Forum>CPUs>HT link and performance> Related ressources: ForumSolvedPerformance Gain with better HT Link ? ForumWhat does HT LINK on Amd have to do with performance ForumSolvedNB freq & HT link freq? ForumSolvedHT Link question ForumSolvedNB Frequency....vs HT Link frequency.... ForumPILE DRIVER FX 8350 NB AND HT LINK SPEED WHICH MUST BE HIGHER ForumPhenom II 960T HT Link ForumPros and cons of overclocking NB and HT link ForumSolvedPhenomII X2 555 HT1.0 performance impact? ForumHT Link ForumHT link Forumperformance difference while going from HT 2 to HT 1 ForumHT link, lower is worse? ForumHT Link Width? ForumHT link at 2300 mhz bad? amd athilon x2 250 ForumHT Link Forum1353MHz HT Link, is that a bad thing? ForumAMD HT link question ForumDual exeon ht performance ForumWill gigabyte GA-970A-UD3 HT only 4800 mt/s affect performance with am3+ cpu wit More resources Read discussions in other CPUs categories AMD Intel Intel i5 Intel i7 Phenom Cooling Performance !