Bsod, Freezing and restarts.

[Andrewoi1]

So it all started with a blue screen of death. I restarted my pc and it worked fine, for about 3 hours until it froze. I had to turn off my pc and when I tried turning it back on the pc would turn on but the screen would go on sleep mode. I had to try several times to get it to start again trying to go into safe mode. The pc would randomly turn off then back on. The message at the top of the blue screen was IRQL_NOT_LESS_OR_EQUAL. Then 0x0000000A( 0x00000000, 0x0000r0lB, 0x00000000,0x824A91AB. Another one I got was 0x00000Bc5c5 ( 0x00000004, 0x00000002, 0x0000001, 0x81oE767D.
Thanks

 

[sukito]

it seems your video card is defective, if you have another video card try that one and make sure to uninstall the video card drivers.......

 

[sukito]

So it all started with a blue screen of death. I restarted my pc and it worked fine, for about 3 hours until it froze. I had to turn off my pc and when I tried turning it back on the pc would turn on but the screen would go on sleep mode. I had to try several times to get it to start again trying to go into safe mode. The pc would randomly turn off then back on. The message at the top of the blue screen was IRQL_NOT_LESS_OR_EQUAL. Then 0x0000000A( 0x00000000, 0x0000r0lB, 0x00000000,0x824A91AB. Another one I got was 0x00000Bc5c5 ( 0x00000004, 0x00000002, 0x0000001, 0x81oE767D.
Thanks

Also dont forget to test your memories one by one.

 

[legendkiller]

Reconnect all the power wire from motherboard, especially the 20/24 pin...

 

[Andrewoi1]

When I looked up on the internet how to fix the issue it also said to uninstall the video card driver. I unistalled it but still had the issues so decided to reinstall it. I might have installed it incorrectly not sure. Also how do I test my memories? I can only operate from safe mode.

 

[legendkiller]

When I looked up on the internet how to fix the issue it also said to uninstall the video card driver. I unistalled it but still had the issues so decided to reinstall it. I might have installed it incorrectly not sure. Also how do I test my memories? I can only operate from safe mode.

First of all, did you do what i ask you to do? if so than do some other test such as taking cpu out and put back in... for memory testing, us Memtest86+ and than test it awhile booting by porting it in a USB flash drive OR CD disk... Reset CMOS and manually put settings in... It could be some of the setting probably making cpu at low voltage or something similar in BIOS...