Sign in with
Sign up | Sign in
Your question

PSU cable legnth help query

Last response: in Systems
Share
November 9, 2012 1:54:53 PM

Hi, i am hoping someone on here can tell me if an XFX 650w PSU will be ok cable length wise in an Antec three hundred two case, and leeway for able management.

Thanks :) 

More about : psu cable legnth query

November 9, 2012 2:26:27 PM

I am just hoping someone could help to see if the PSU will be ok :) 
a b B Homebuilt system
November 9, 2012 3:13:55 PM

That case is a smaller mid size ATX case. Any retail powersupply should be fine cable length wise. When you get into the custom larger cases and full size ATX cases is when you really have to pay attention to cable lengths.

You will be fine. The only cable length issue I've ever had with a case that mounts the PSU at the bottom is the ATX12V/ESP12V cable that plugs into the motherboard next to the CPU. You have to run it directly up and under your dedicated video card. It is definitely long enough, but you can't really tuck it away behind the motherboard for cable management. This is not really an issue, but I've had to do it with every build so far that mounts the PSU on the bottom.
Related resources
November 9, 2012 4:18:09 PM

Ok thanks, that was a good help i can now hopefully order my PSU and get on with my build worry free for once haha :) 
a b B Homebuilt system
November 9, 2012 4:31:20 PM

You can easily get extensions if cables aren't long enough, like the 12Atx mentioned, some of the full towers come with them as part of the baggie
Moto
!