Sign in with
Sign up | Sign in
Your question

192 168 1 1admin

Last response: in Wireless Networking
December 4, 2011 3:44:45 AM

i bought a trendnet tew651br to set it up on my computer i need a pin numb er. they kee sending me to netzero and then netzero sends me to dell and dell sends me back to trendnt im all set up all i need is a pin number. help please. its a wireless router to a wireless computer

More about : 192 168 1admin

December 4, 2011 5:54:02 AM

Hello and welcome to Tom's Hardware Forums.

Use the cable that came with your router to connect to your computer then go Start then Run in XP - or use the Windows key plus R in Vista and Windows 7, then type in the following into the Open box, including all the spaces:-

cmd /k ipconfig /all

then press Enter and from the black form that shows up, take a note of the numeric code beside the Default Gateway icon - something like

Type exit to close the black form.

Open Internet Explorer and enter that code into the URL address bar as though it was a website. You're then at the login page to the router's settings utility and admin will usually be the login with either admin or password as the password but your router's instruction manual will help you there.

If you're in, seek out Wireless and then Security and take a note of the key. Sometimes it may be a passphrase, some a simple set of letters and others a hexadecimal code. You also may as well note which level of security it is - WEP, WPA or WPA/PSK 2 and then either AES or TKIP. Your computer will already know this but it's handy information to store. Note also that hexadecimal only contains numbers from zero to 9 and letters a to f so there's no confusion of I and O with 1 and 0.

It's adviseable to keep a note of that security key in your Documents folder and also outside the computer.

December 5, 2011 4:53:05 PM

At what point does it ask you for a pin number? Is that exactly what they call it?