Sign in with
Sign up | Sign in
Your question

No signal from input, BIOS wont start

Last response: in Systems
Share
November 20, 2012 12:57:42 PM

Hello, I have a problem, I finished my computer build this morning when my GPU arrived, powered it up and plugged the DVI cable into monitor, there was no signal. Everything is turned on, all the fan and LEDS are working, the lights above the CPU are on (all 4), the GPU fans are spinning everything seems fine but I still have no signal.

I have reseated the GPU, taken out the CMOS battery for 5 minutes and put it back in, and I've tried my ram in every slot. I just don't know what to do.

SPECS-

Mobo = MSI 970A-G46
GPU = XFX 1gb 7770, superoverclocked black edition
RAM = Corsair Vengeance 1600mhz, 1x 8gb.
HDD = 500gb western digital caviar blue
Case= Sharkoon Blue T9 Value gaming case
PSU = Corsair builder series CX600 watts

I don't think I need to breadboard it as all the parts seem to be functioning.
Thanks, please help me.
a b B Homebuilt system
November 20, 2012 1:38:19 PM

make sure you have power going to the video card, if the motherboard has an integrated graphics try connecting the monitor to the integrated video port
November 20, 2012 1:48:14 PM

alvine said:
make sure you have power going to the video card, if the motherboard has an integrated graphics try connecting the monitor to the integrated video port


Yeah power is going to it the fans are spinning, I don't think my motherboard has intergrated graphics.
November 20, 2012 11:43:23 PM

Same problem here. will check back later for answer, and will post here if i figure out whats up.
!