Sign in with
Sign up | Sign in
Your question

Monitor\gpu Disconnects whenever i turn off my display

Tags:
  • Radeon
  • Monitors
  • Graphics
Last response: in Graphics & Displays
Share
September 30, 2012 7:55:42 AM

Hello there, hope you guys are having a pleasant day.

I have a SAMSUNG SyncMaster B2440. A 23 inch Full HD monitor

Connected to an HD RADEON 6870 1 gb Card by a DVI Cable.


Now... the problem is that whenever i turn off my monitor the windows makes a sound as if i disconnected a "USB" device, and whenever i try to turn on the monitor again it doesn't get the signal from the "GPU" unless I unplug the display cable and re plug it again.


Can anyone help me with this please?

Thanks in advance peeps.

More about : monitor gpu disconnects turn display

October 2, 2012 4:32:33 AM

Go into the power profiles,
set standby, hibernate and sleep to OFF
leave the monitor standby ON, that's OK (maybe not, try OFF)
Set the Hard Drive standby to NEVER
Set system Performance to MAXIMUM, not "quiet mode."

Open the bios set up and make sure "cool and quiet" is OFF. (AMD)
There may be a performance setting in the bios setup you have...make sure it's cranked up to max.
in the bios, see that the allocation for video, if available, is maxed.

Now open the hardware manager profiles...
click start
click computer
click system properties
click device manager
double click on mice and other pointing devices
right click on HID compliant mouse
left click on properties
click on the power management tab
UN-check the box that says: "allow the computer to turn off this device to save power." (there is now NO check mark in this box)
click OK

Now repeat this procedure for all mice, monitors, keyboards, and ALL USB ports on the device manager list.

You must open ALL the devices one at a time, as above, and turn off the power saver, for each device.
m
0
l
!